The HL20 settlement tank is designed to remove solid particles from water (20m² volume).
Enquire NowEnsures compliance with authorities such as the Environment Agency and Water Boards
Removable Lamella plates for easy cleaning
Tapered sludge tank for fast effective sludge removal
Provision for additional monitoring control to report on final water quality
The HL20 water settlement tank is a simple but effective way of separating solids from water on site.
Silt laden contaminated water is fed into the unit in the back chamber, where it flows around into the base of the lamella plate section of the tank. The water stream flows upward between the inclined Lamella plates. With the reduced flow, the solids fall to the plate surface, where they slide by gravity, down the plate, to the sludge collection chamber at the bottom. The sludge is then periodically drained down using the valve at the bottom of the hopper.
The HL20 has an effective settling area of 20m², however, with rapidly settling solids or when introducing a flocculent, the flow rate can be increased due to faster settlement. These tanks are typically used with 3” and 4” pumps depending on the flow rate required.
Need an alternative tank size, please view our other available units below:
We process your information in accordance with our Privacy Policy and Terms of Service.
0808 178 3286 (Mon-Fri, 7.30am-4.30pm)