The plastic hoods work in conjunction with RVT's Dustex® Dust Extraction units to capture dust as it is created during site activities such as drilling, stone masonry, tile cutting, sanding, wall chasing and more.
Enquire Now
Use a capture hood to extract dust close to the source
It is easy to move and adjust the position of the hood as work progresses
Compatible with Dustex® Dust Extraction units
Please enquire for bespoke dust hood requirements
The capture hood should be placed as close as possible to the work activity. When positioning the hood, think about how the dust will travel when you are working to ensure that as much dust is captured as possible. For example, dust from an angle grinder travels in the direction of the cut, whereas dust from breaking or drilling travels toward the floor. Therefore, careful placement of the hood is vital to ensure that as much dust as possible is extracted at source. The plastic hoods incorporate a captive fixing which allows it to be fitted to stands, scaffolding etc.
The hoods have a wide mouth at one end and a round ducting hose connection at the other. The 450x450mm hoods are designed for use with 250mm ducting. The 500x500mm and 600x600mm hoods are for use with 300mm diameter ducting. An RVT consultant will be able to advise which hood should be used as part of a bespoke dust extraction system.
We process your information in accordance with our Privacy Policy and Terms of Service.
0808 178 3286 (Mon-Fri, 7.30am-4.30pm)
