A high airflow ATEX approved centrifugal fan, suitable for use in potentially explosive atmospheres.
Centrifugal fans are traditionally more efficient than axial fans; creating higher pressure and a steadier airflow
A reliable solution for Hot fumes, Paint and other volatile fume extraction
Meets the safety requirements for use in an explosive atmosphere
Can easily be moved from one place to another on site
Based on the Ventex Centrifugal Fan 300M, this unit has the same level of performance, but the motor has been changed to a low voltage motor to comply with the European ATEX Directive (2014/34/EC). This directive applies to the manufacture of products which are used in potentially explosive atmospheres. This high powered centrifugal fan has an airflow of 5400 m3/hr and is available with an optional 4-way spigot as pictured in the images below. When used with ducting, this unit is suitable for extracting contaminated air, or forcing in clean air, depending on set up.
Important Operational Instructions
Machine must be located on a firm level surface and secured if near an edge. Keep inlet area clear of any rubbish or debris. Keep duct runs as straight as possible.
Outlet fan / ducts should be pointed away from work areas / dusty environments. Filtration can be supplied if required. Motors get hot during use. Due to a high start current surge, the transformer should be wired to a board with a min. 20A trip.
Looking for pricing? Need more information? Do you need this kit on site now? Please complete the form below, and an RVT representative will respond to you via email or phone. Please note, this form is for UK enquiries.
We process your information in accordance with our Privacy Policy and Terms of Service.
0808 178 3286 (Mon-Fri, 7.30am-4.30pm)
