A powerful fan extracting and filtering up to 5400m3 air/hr
Filtered through the primary EU4 washable filter, the EU7 or HEPA filter, and a Carbon Filter
Allowing you to work in confined spaces, and extract dangerous fumes out of the work area
This unit is perfect for paint fumes, welding fumes and other hot or volatile fumes
The VENTEX 300CF Centrifugal Fan used with this kit is particularly suited to extracting any hot fumes or paint fumes because the motor is not in the airflow, also where long duct runs are required to remove the fumes to atmosphere. The fan is used in conjunction with the extended WandaFilta unit to create a negative pressure in the work area and filter out the hazardous and flammable fumes and vapours through the filter medias. The filter unit is fitted with the primary EU4 washable filter and EU7 or HEPA to remove any particulate in the pollutant followed finally with an activated Carbon Filter. When dealing with flammable fumes the fan should be placed outside of the work area and intake suction ducting run to the area of works to extract from source of fumes. Activated carbon, also called activated charcoal or activated coal, is a form of carbon that has been processed to make it extremely porous and thus to have a very large surface area available for adsorption.
Just one gram of activated carbon has a surface area in excess of 500 m2 Activated carbon has a capacity for virtually any vapor contaminant and will adsorb and retain a wide variety of chemicals at the same time.
Activated Carbon also works well under a wide range of temperature and humidity conditions.
0808 178 3286 (Mon-Fri, 7.30am-4.30pm)