The D1200 is a high-pressure dust and fume extraction system with 8 extraction ports which can be split into further extraction points depending on site requirements. This unit is suitable for activities such as welding, soldering, brazing, grinding, sanding, sawing, cutting and a number of other on site activities.
Enquire Now
This unit has 8 extraction ports which can be split into further extraction points depending on site requirements
Automatic pulse jet cleaning is carried out on an as-required basis during operation and as part of the shut-down process
It can be used as a centralised vacuum system across multiple storeys with a range of tools, nozzles and flexi hose for hard-to-reach areas
For the extraction of welding fumes and grinding dust during repairs to boilers, furnaces, and ships and more
Due to the number of extraction points, this system can also be used as a centralised vacuum system across multiple storeys. This solution can extract via long duct runs and high duct velocities. The unit has 8 x 100mm extractor ports, suitable to connecting 100mm diameter ducting. The ducting can be further split to create multiple extraction points depending on site requirements. Please note, processes such as welding will require minimum airflow as specified by HSG 258, and in turn this will determine the maximum number of extraction points that this unit can support.
The D1200 contains an integrated HEPA filtration system. Filtration is provided by a cyclonic separator and cartridge filter system. Automatic pulse jet cleaning, powered from an integrated compressor (150 PSI), is carried out on an as-required basis during operation and as part of the shut-down process, making maintenance hassle-free.
We process your information in accordance with our Privacy Policy and Terms of Service.
0808 178 3286 (Mon-Fri, 7.30am-4.30pm)
