Yes, our LEV consultants are experts in hazard control and can help assess your site requirements, propose the right extraction hood, fan, filter, and duct configuration, to provide a fully compliant solution.

Yes, we have high-pressure fans that can be used as part of the LEV system, that sit outside the work area and operate with narrow and long lengths of ducting runs, making them suitable for confined work areas that are based a long way from the atmosphere.

Yes — for example, for dust we have DUSTEX® DustMaster® Pro and for fumes we have RAVEX® Wandafilta Plus - Extraction & Filtration Kit.

Yes, we offer temporary hire of LEV solutions, which makes them ideal for shutdowns, maintenance, welding, or cutting tasks. Our team will help design and set up the system for your specific project needs.

Particulate filters - Designed to trap heavy particulates such as particles created from cement dust and wood cutting. A medium grade filter like this is also 80% effective at removing smaller particulate matter down to 1 micron in size (PM1 - 1 μm) including some finer dust particles, industrial fumes, and bacteria spores.
Fine filters - Ideal for visible dust removal and designed mainly for low-toxicity dusts or where the system is venting to a safe area. Acts as a protective layer when using highly efficient filters up to HEPA standard.
High Efficiency Particulate Air (HEPA) - The most efficient filter available on the market, designed to give virtually clean air. Welding fume, burning fume, smoke and even airborne bacteria such as COVID can be caught with a filter of this efficiency.
Gas filters - A particulate filter will not prevent gas from passing through it. Work that requires gas to be captured needs a filter with specific materials such as activated carbon. When gas passes across these filters, a chemical reaction causes the gas molecules to stick to the surface of the filter.

Our standard LEV setup includes a capture hood, ducting, a fan, a filter, and a discharge point.

Our LEV systems are designed to extract a variety of hazardous airborne contaminants including welding fumes, solvent vapours, gases, mists, and fine or heavy dust.

We provide a full suite of LEV solutions for fume, dust, mist, gas, and vapour extraction. Our range includes portable fume extractors, duct‑mounted filtration units, and large multi‑spigot LEV systems, tailored to the needs of construction, industrial maintenance, and confined‑space work.

Yes, we can supply an LEV kit which will come with a TExT certificate. The certificate demonstrates that the kit was supplied in good operational condition, but it is the customers responsibility to check that the system is properly installed and working as intended.

Yes, our Local Exhaust Ventilation (LEV) systems undergo Thorough Examination and Testing before leaving our warehouse, so you can rest assured that it’s compliant and in peak working condition when it reaches you. Our LEV testing is carried out by qualified LEV engineers who hold BOHS (British Occupational Hygiene Society) certifications (e.g. P600, P601, P604). Click here to find out more about our TExT process.

A Local Exhaust Ventilation system is designed to extract contaminants like dust, fumes, mists, fibres, gases and vapours at the source. LEV hire systems are subject to a Thorough Examination & Test every 14 months, providing evidence that the equipment is in top condition for use on site. The use of LEV equipment on site helps ensure that teams are compliant with COSHH Regulations and adhering to HSE Guidelines.